WORKPROPneumatic Nail Remover, Professional Heavy Duty Punch Nailer/Nail Puller/Nail Remover for Wood Workpieces, 60-100 PSI Denailer Removes 9-16 Gauge Nails

I bought this because I do a lot of project with old pallets. I spend the majority of my time breaking down the pallets. This amazing tool has significantly cut down the time it takes to de-nail the pallets. There is some trial and error for the right settings. Air pressure too high and the nails are flying projectiles. Set up a target, make a game out of it. (Be sure to wear safety glasses) For the thinner pieces lower air pressure and getting the 16 penny nails out of a 2x6 crank it all the way up. The thicker wood it will drive most of the way out and use a pry bar or your claw hammer to finish it the rest of the way. Great tool, highly recommend for the hobbyist. Not sure how well it would do for heavy use, but that's not what I bought it for. Also it will drive out long staples as well. For the price you cant go wrong.

The media could not be loaded. Helped me remove nails quickly in abunch of pallets. We always need speed when doing a project and this tool is fast safe and efficient. See the video. If you are looking for a smart fast way to remove nails then this is it. Totally a great tool. Worth every penny. You don't realize how using the right tool for the job makes removing nails so easy. Built tough. Not a cheap tool that will only last a few days. You can tell there is great materials used here and super powerful. It is a perfect gift for your Dad or Grandpa.

This Denailer works exactly as advertised. Very pleased.

So here's the deal. It works...very well. So well that if you're removing nails from thin material over concrete floors it turns the nail into a ricocheting projectile of doom. So you turn it down right, but wait. Which way is "down"? The knob on the back has a double sided curved arrow showing you that you can in fact rotate it to the left or to the right. Excellent. So the manual will obviously have a clearer answer...nope. It says: grr manual isn't available here so I'll go to their website. Wait, this item isn't even on their site. Ok well I'm not going back to the shop to get the manual for this. The manual basically says 'turn the position of the dial to the desired position.' It says the about word twice lol. Outstanding. Well, let's just try turning it far to the left BAM [note the sparks] ding pow clink. Double ricochet complete. Guy that's 15 feet away from me (room is 24 feet by 24 feet) says "uh it hit the wall by me. I'm going outside" then opens the roll-up door and goes outside about 15-20 feet away and starts messing around on his phone. I have glasses on but now put on a face shield. Hmm let's try far to the right this time. On to the next...BAM dink...(slight pause then distant clink...) Dude says 'uh it landed by my foot I'm going around the corner.' So right must be higher power... I close the door and remove another nail dink clink clank. Ok two ricochets again. For the heck of it back to the left side, BAM dink clink clank. Right again? Clink dink clank. Wth. So I get the same number of ricochets either way. The nail is forcibly ejected without a doubt. The material is being removed from is 1/4" thick plywood. Perhaps your takeaway is 'well yeah it was thin material'. Ok so, don't use it on thin material. Second, the manual doesn't give any direction on the matter so you better hope they used the lefty loosie right tighty thought pattern. I was unable to confirm this. Finally, the thing does exactly what it says and does it very very well. The nails are removed thoroughly. Wear a face shield, long pants, long sleeves preferably and have other people exit the room or go to an area where they have no direct line of sight to you and that their location is ricochet resistant e.g. no metal or concrete wall. Sheet rock is better since it will absorb the impact. Next, on occasion it threw sparks regardless of whether its knob was to the far left or to the far right so no combustibles (that should be a no brainier... Except that you may very well be standing in a woodworking shop mid day so it's a bit dusty. Gr8. Maybe just go outside? Lol yep go ahead and eject those nails in unpredictable directions so you or your neighbor gets a flat tire. Finally, FWIW, the nails never hit me, go figure.In conclusion, it removes nails.

Purchased for reclaiming 70 year old hardwood oak flooring. I don’t think I would’ve started the project without having this tool punches out square nails that were used in the past fast and quick. Put a towel in a 5 gallon bucket so you don’t hurt yourself they come out at 100 miles an hour.

This thing is FANTASTIC! I repurpose a lot of wood in diy & home projects. One of the most time consuming parts of that is removing the old nails and screws. But with this tool, FWAP! And it's out! Also sometimes the heads break off but the nail or screw is sticking out the other side. When that happens you have to get creative. Not anymore! FWAP! It's out! Very efficient on air use as well. Using a 3 gallon compressor at 110 regulated psi to the tool and 150psi in the tank, I got well over 50 nails out. Maybe closer to 100? Without having to plug the compressor back in to refill. It worked very well from 110 all the way down to 80 psi. Power loss at 80psi was very noticeable. Might be worthwhile to reduce regulated pressure to 90 or so, for less wear on the tool's seals.I have just about every tool I can imagine, in some form or another. But after just 1 day of use, this thing is, by far, my favorite!DON'T FORGET TO OIL THE TOOL!

Does everything it says...I've removed 1000+ nails of all sizes and works like it did the first day!

Was super disappointed in this product as the fitting does not fit a standard fitting and I have not been able to find one that connect onto my arrows, so I still have yet to abused it