Dual Monitor Stand for 13"- 32" Screen, Freestanding Dual Monitor Arm Desk Mount with Sturdy Base, Adjustable Double Stand Hold 8KG/Arm

my desk has a back on it and drawers so a drilled hole or back clamp were not feasible - i also wanted a flat base so that the area under the monitors could be used. This was for the left two monitors of a three monitor set up where i wanted a big space under the central monitor to slide the wacom when not in use. So two monitors to the left with the stand to the left side and the right monitor on its own stand to the right and a gap between. This works perfectly and because the arms have a hinge in the middle it means the monitors can be angled slightly in towards each other (a shallow V) and this also allows them to almost touch the central post meaning the weight is well back so there is no chance of them tipping over. On opening the box i thought the moulded plastic cable clips were a bit cheap and cheerful but actually they are really useful and the idea of having slots in the central one for the allen keys is sheer genius because when you come to adjust these things years after installation you can never find the appropriate keys without a big search. Finally one thing is very important for setting this up - when you are first hanging the monitors on it, work out the distance between the bottom of the monitor and desktop and get some books of this height so that the first monitor will sit on them when you attach it - otherwise the whole thing will tip over and be very unwieldy - with that first monitor soundly sitting on the books the second monitor is easy to put in place. I did not have the problem mentioned by some reviewers concerning the loose fit of the vesa bracket into the slot on the arm. It was good that this was a loose fit because otherwise it would be tricky to slot the monitors on to the stand but OTOH the slight lean from this can be compensated for by tipping the monitor back slightly. This was so good that after two days i decided to replace the stand on the third (right) monitor with the matching single monitor stand given the advantage of the completely flat low base.

I've had this for over a year and my god it's changed my desk! I have far more space than I did before, it looked better and it's so sturdy! Gives a massive amount of desk space and I've never had an issue with it working. Absolutely a must have if you have more than 1 monitor!

I was originally very unsure about this purchase due to the onslaught of negative reviews, they mentioned issues such as the glass being scratched, the arms being weak and unsupportive. This was completely untrue for my case and I'm vert pleased with it!The package was small but well protected with everything being tightly secured with foam and cardboard. The instructions were very useful and simple to understand with only a couple of steps to fully assembled my duel monitor step up! During the build the only issue I had was certain items were not numbered, however were easily identifiable.Once built I did have some issues getting the left arm to stop tilting the monitor but after a good amount of strength I managed to tighten it enough for it to stop dropping over time. I will say this was my only issue and a minor one at that, I found it helped to hold the monitor above or in place and then tighten the bolt rather than tighting and then moving the monitor as when the monitor moved it must have ever so slightly undone the bolt to then sink back down again. I will point out I was close to maximum weight and size as I was attaching two 32" monitors that were 8kg heavy each. Anyone with less then I should have no issues putting this together.The stand also came with 4 wire clips to allow cables to be managed. This was a fantastic way to manage the cables and definitely an improvement over my previous set up. The middle supporting tube was hollow with a removable top, however, no optem bottom which in my opinion was a major oversight as this would have been an even better way to hide the cables.Over all, a very well designed monitor stand that managed to hold up my massive monitors. You just need a little elbow grease to get some bolts in place.I am two days into using this product, if anything changes I will be sure to update this review :)

As you can see from the pics the side of my desk is an open space which the OEM stand would not reach, a desk bracket wouldn't work either because there is no edge to clamp onto. However, this sturdy based stand is rock solid and does the job with ease! A bit of a fiddle putting it together, nearly stripped one of the base screws as it is so shallow a thread but got there in the end by removing one of the washers then screwing it in so it protruded then unscrewed it, put the other washer back on and it screwed in perfectly flush! This is the only reason for knocking a star off "Easy to assemble". The screens are not identical but I am happy with the overall look and extended view setting which makes great use for dual monitor home working. I like the simple but effective cable ties, tucking all the power and video cables neatly out of the way, as you can see they are hardly noticeable front on. The base is heavy and big and needs to be, no chance of tipping over with 2x 24" monitors (surprised other reviews said it does!) It is a quality made product imo designed perfectly for this kind of problem. Highly recommended.

Saved soooo much desk space on my tiny desk. Need two screens for work, was originally going to go for a £100 brand name dual arm from Curry's but to save the pennies, I was willing to give Amazon, (Chinese manufacturers) my two 22inch LG monitors in their safe arms and it is holding very well with no wobble! Time will tell but super happy with this one!

Good stand, wasn't as straight forward out of box as I was expecting but wasn't difficult to build. Only thing I wish was that the arms could move independently of each other! Also if you bring monitor too far forwards jt does topple over

Excellent monitor stand at a very reasonable price.Used to mount 2 x 27" AOC monitors, it holds these without trouble.Assembly took around 25 minutes using the two allen keys provided.