SilverStone SST-RVZ03W-ARGB - Raven Mini-ITX Gaming Computer Case, ARGB, white

Amazing slim case to build in, and it seems to have the best temperature characteristics of any other mini-ITX case. Just for the love of god, do not use an ATX power supply especially one with non-modular fat cables or building anything high-end will become an exercise in frustration. It fits an ATX PSU, but you'll have barely enough space to tuck cables away.Do yourself a favor and use an SFX PSU. This is less of a problem with smaller components that take up valuable space, because everything will be fighting for it. Everything will depend on what size the PSU and graphics card are. I recommend sticking with APU's or small to medium graphics cards.There aren't that many ways to configure this but there is a possibility of mounting an AIO up to 240mm (if the GPU isn't used) and as low as 120mm with tiny GPUs.I really liked that this case includes decent 2x120mm slim fans, I don't like the fact that they aren't PWM, so you can only control them with a separate box or your motherboard has to support manual DC voltage control for the fans.And speaking of cooling, the CPU is going to have the worst time, I got up to 50c idle on a Ryzen 2600, but during load it can be anywhere from 60-70, and I'm not even talking about the RAM, VRM and everything else in between that will be absorbing all of that heat, I recommend getting another 120mm slim fan to fill out the last mounting spot, as this case will be starving for airflow.Minor nitpick but, I wish the front had addressable (Digital) RGB light as opposed to just Analog with a single color for the whole strip to sync with. At least an option would have been nice to be able to replace the strip yourself, but I don't think the parts covered by plastic are accessible and I am afraid to break them when trying to pry them away.Anyway, enough rambling.It's the best Raven iteration by Silverstone so far, there's still room for improvement in the CPU side of cooling efficiently. It's easy to build in if you have a good grasp of cable management, practice patience and the order of installing everything. The end result is almost art.Oh and PS: Once you re-build everything and readjust a few times or just add that extra fan, placing everything back becomes really easy.

Lovely case, fits in well as a HTPC, would have given 5 but for the fact you need a sata converter ( https://www.amazon.co.uk/dp/B009JXKQ9O/ref=cm_cr_ryp_prd_ttl_sol_6 ), getting a cpu cooler that can fit can be hard, so I puchased AIO watercooler ( https://www.amazon.co.uk/dp/B01549UHGI/ref=cm_cr_ryp_prd_ttl_sol_13 )and put it under drive tunnel.

This case is great! It was a struggle to build in at first and it takes longer than it usually would in a tower case, especially since i used an atx psu, but it was worth it. I really like how quiet this case is, the fans included are dc controled however, but as long as your motherboard can control both pwm and dc, make sure you switch it to dc controled to make it quiet.At 14 litres you cant get much smaller while using an atx psu, and tier 1 psu's are much cheaper than sfx. Mine is a seasonic focas gold 750w and its super quiet.The cooling is pretty good for a case so slim, i have a small overclock on an i5 10600k, and those cpu's tend to run hot.The gpu area has good ventilation, and there aren't many gpu's that wont fit in this case.All in all im happy with my purchase

Easy build overall.Double check that the fans are the right way round, I think all fans should suck air in, and then hot air is vented top and bottom.The case comes with two fans, I added an extra fan above the GPU for a total of 3 fans.The manual recommends two fans above a graphics card.The PSU bracket is sized for an ATX. I would recommend an SFX-L power supply, it won't be a tight fit in the chassis however the extra space is used for cable management.I used a noctua NH-L9x65 65 mm fan which is the bigger version for extra cooling.Half of the case is dedicated to the graphics card, allowing for full sized 33cm graphics cards.There are four 2.5" bays meaning loads of storage for multiple SSD.The LED lights on the exterior of the case are nick and, not tacky.I installed an AMD Ryzen 7 3700 X.I installed an Asus ROG Strix b450-i gaming ITX motherboard.

Pros- Great case even for normal sized GPUs- Very small, great for a discreet desktop in the living roomCons- Difficult to build in- ATX PSUs should be avoided, the extra space is better used for cable management.- SFX PSUs require a bracket- Didn't come with a manual or any documentation

Ok, I fitted 980ti Lightning (yes, probably the largest Nvidia GPU out there) in this case, just to give you some perspective.Max GPU temp with two fans in front of the GPU was 66 Celciuis, which is awesome, really.CPU is i7 8700 (non-k), idling at around 40 Celcius, climbing up to high 80s, topped at 90 while playing BF1.Overall, great case which is a bitch to build in. considering 980ti Lightning requires 3 (!!) 6+2 pin PCI-E and the cables that go along with this, as well as suitable PSU, which is Seasonic 750W in my case.CPU cooler is Cryorig C1, which was another bitch to fit in, but once done - serves well and awesome.Cable management was awful experience for me in this case, I've tried best I could.Satisfied, just prepare to spend 5-6 hours building in this case

Das Gehäuse gefällt mir gut. Es gbit zwei voneinander getrennte Kammern für CPU und GPU. Ich habe bei mir eine 3060 Ti FE verbaut aber theoretisch könnte man auch noch eine größere Karte verbauen.Ein Problem das mir aufgefallen ist, ist die Verkablung vom Netzteil. Der Netzstecker ist ungünstige platziert und so kann es sein das es schwierig ist ein Netzteil zu installieren weil der beigelegte, angewinkelte Netzstecker (Steckdose->Netzteil) zu groß bzw. lang ist um ein ATX Netzteil problemlos zu installieren. Zu 2. und mit sehr viel drücken haben wir es dann trotzdem geschafft :) Man sollte also darauf achten wie weit am Rand der Netzstecker in das Netzteil gesteckt wird (zu nahe am Rand = schlecht).

Estaba buscando una carcasa de calidad, sin componentes "frágiles" que se pudieran dañar a la hora de viajar, y que cupiera en una maleta de cabina para poder viajar con mi PC sin problemas.Ha resultado ser una completa y absoluta sorpresa, cabe todo sin problemas, y gracias a la presión positiva, los componentes se mantienen a unas temperaturas muy buenas.**Advertencia, al ser ITX, y de la forma que está diseñada, está todo muy bien pensado, pero te tomará unas cuantas horas para colocar todo de forma adecuada.**Aunque caben fuentes de alimentación SFX-L, la recomendación es poner una SFX para poder gestionar más cómodamente el cableado.En mi caso, dentro tengo un Ryzen 7 2700X con 16Gb de RAM, 4 discos duros (uno M2 en la placa base, uno SSD y dos mecánicos), una Sapphire R590, y una fuente SFX de corsair.Sólo con ventiladores, las temperaturas no estaban mal, pero añadiendo un Corsair H60 para el procesador, y un Corsair H100x + NZXT Kraken G12 para la gráfica y un par de ventiladores Noctua de bajo perfil, las temperaturas son espectaculares.Muy recomendable si necesitas armar un sistema pequeño, eficiente y silencioso.

FTZ01S, un boitier Mini-ITX en métal de 14L à peine plus volumineux qu'un Node 202 (10L), super look alu-argenté style matos Hi-Fi des années 90, j'ai donc pris cet 'ancien' modèle avec fente pour lecteur de disque en façade: Attention dans cette version du boitier contrairement à l'autre sans fente (FTZ01-E & FTZ01S-E) il faut impérativement une alimentation SFX sinon vous serez gêné par le panneau frontal USB/audio.L'intérieur est spacieux et d’agencement 'facile' (comparé au Node 202 qui lui est étroit et complexe), la fixation de la carte graphique est simple, il y a 85mm de hauteur pour le ventirad du processeur ! (j'ai mesuré sur du Intel 1151) ce qui laisse un grand choix, bref c'est un boitier qui conviendra aux débutants en montage de PC compact.Le panneau supérieur (ou latéral en position verticale) s'enlève complètement et facilement avec 2 vis, on peut le remplacer par n'importe quoi si on est un peu bricoleur (verre, maille en métal, plexi, bois).Les boitiers SilverStone des séries FTZ0 et RVZ0 se ressemblent tous beaucoup en design, ce ne sont pas les plus petits ni les plus efficaces en températures pour configuration Mini-ITX, mais ils offrent une variété de looks séduisants selon les gouts, n'exigent pas un haut niveau de compétence en montage, restent assez abordables et de bonne facture.J'enlève juste une étoile pour les pieds fournis qui ne sont pas en métal mais en plastique peint, coulissants pour mal s'adapter à la largeur et du coup n'offrent quasiment aucune stabilité en position verticale, dommage après ce quasi-sans faute.

Goeie en solide stalen computerbehuizing (alleen jammer dat de covers aan de voorkant en zijkanten van plastic zijn). Ziet er heel subtiel uit wanneer de RGB niet aan staat (nog niet ingeschakeld gehad, dus weet niet hoe het er mét uitziet).De interne verlengkabel voor stroom heb ik echter met heel veel moeite in mijn SeaSonic-voeding gekregen. Op de een of andere manier leek de vorm van de stekker een ​​beetje anders te zijn dan de reguliere stroomkabel waardoor deze niet helemaal goed paste.Toen ik de PSU monteerde, werd de hoek waar de stroomkabel loopt ongelooflijk krap en wordt de kabel nu waarschijnlijk een beetje afgeknepen omdat de PSU anders niet zou passen. Bovendien is de verlengkabel eigenlijk een beetje te lang, dus je zult hem opnieuw moeten leggen om de extra lengte kwijt te raken en problemen met de luchtstroom te voorkomen.Mijn PSU heeft een lengte van 12,5 CM en geloof me als ik zeg dat je GEEN grotere wilt. Ik heb *net* genoeg ruimte over om zonder al te veel gedoe modulaire kabels te kunnen plaatsen / verwijderen.Wees tot slot voorzichtig met de kabels die zijn aangesloten op de aan / uit-knop en de resetknop. Tijdens het omleiden raakte een van de pinnen van de power knop los en moest ik die opnieuw solderen. Niet iets wat je van een toch wel duurdere behuizing zoals deze mag verwachten.Dat gezegd hebbende, het grootste deel van deze case is slim gemaakt en modulair opgebouwd. Het zijn alleen de 2 problemen zoals hierboven beschreven die wat oplossingen vereisen om er echt goed gebruik van te kunnen maken.

Perfektes Gehäuse für einen ITX PCDie Grafikkarte wird mit einem Riser befestigtWakü nicht möglich dafür aber mit flachen Noctua Kühler perfektWürde auf jeden Fall sfx Netzteil empfehlen