OurTaps Thermostatic Repair Cartridge with Screw Thread for Shower Valve and Bath Mixer, Generic - 111Z

• THERMOSTATIC REPAIR CARTRIDGE WITH SCREW THREAD FOR SHOWER VALVE AND BATH MIXER, GENERIC, 111Z.

Product description ------------------- REPLACEMENT/REPAIR THERMOSTATIC CARTRIDGE FOR BATH MIXER & VARIOUS SHOWER VALVES WITH SCREW-THREAD (NOT PUSH-FIT!): Specification & Features: Principally made from brass, this generic 'Screw-in' type Thermostatic Cartridge is suitable for many makes/types of Taps and Showers. Please note it is NOT a 'Push fit' type where you use a grub screw to secure it in the casting/body. The operating Temperature range is between 20 to 48 Degrees C, with safety override button at the 38 Degrees C position. The cartridge comes calibrated to 38 Degrees C. The required/recommended water pressures for operation are 0.5 bars to 5 bars. The maximum imbalance ratio between hot and cold must be no more than 5:1. It can be used with most systems subject to these requisite water pressures. To install it with a Bath or Shower Mixer Tap/Valve, all you have to do is remove the handle (there is usually a small cap that can be prised off to reveal a grub screw inside), then use mole grips or similar to grab the large 'cogged' shaped section and unscrew from the casting/body. Insert the new cartridge & tighten, then attach the handle to the new cartridge and test it. With the new cartridge the manufacturer put markings on it to show where it has been calibrated to the 38 degrees position so you can line it up correctly with your handle/stop ring. Lubrication may well be needed around the black rubber seals. Always ensure your water is off when fitting!! The dimensions are: Total Length of Cartridge = Approx 91.4mm - including the copper end section. Widest section where the threads are = approx 34.8mm diameter. Depth of cartridge that is inserted (from top of threads) = approx 60mm. The 3 Black rubber washers are positioned at approx 20mm apart. The screw threads are only 4mm deep and there are 3 of them. Please check the image above and the dimensions below before purchasing and carefully compare to your one before installing. Legal Discler ---------------- We operate a 30 days Returns policy where you are required to notify us within this timeframe and return the goods to us within a reasonable time thereafter. Provided the goods are returned to us at your cost and risk, and they are in an unused 'as new' and re-sellable condition, we will refund the purchase price paid. Goods that have been used or where installation has been attempted, or are damaged in any way by you, are not returnable. With Thermostatic taps and showers, please be aware that they usually require reasonably high water pressures. Please do not install one if you aren't sure about your pressures. If you do, and the pressure is insufficient, then it is NOT returnable. It does not mean that the item is defective!