K90677 Suspension Stabilizer Bar Link for Toyota 4Runner

Perfect OEM fit, very durable, cost less than half what a factory Toyota swaybar link costs, and it works great with my 3 inch suspension lift (full package with shocks, springs, UCA’s, adjustable rear sway bar links, and adjustable rear trac bar from Iron Man 4x4 America. I replaced the front swaybar bushings with Moog parts as well. I replaced both sides on my 2008 Toyota 4runner limited V8 4 x 4 in action in the video. Solid & quiet, but just like the oems, these have no grease zerts on them, just like most parts sold today.

Fits my 07 FJ fine. Definitely noticed a difference after replacing the old ones (140,000 miles). These also are a far better design than the original part because you can use a wrench to hold the back side while tightening or loosening the nut. The original ones have a hex slot inside of the threaded shaft which will either break or strip if you haven't had them off recently. I had to cut the nut off of my originals and replace them for this reason while replacing my struts.

I used this to replace a part that I bought from a local store that had cheap steel that rounded off the bolt heads easily. The quality of the Moog is outstanding and it comes greased. The bottom of the bolt is squared off so a wrench could be used for additional resistance if putting an allen head on the end is not practical.

As you can see in the picture there is a bend in the passenger side end link. It is not supposed to be bent. I contacted Moog to have it replaced as it was supposed to be under warranty. Imagine my surprise when Moog told me it was not an authentic Moog part and refused to honor the warranty! I looked at the warranty statement posted by the retailer, and they say they can't guarantee you will recieve authentic Moog parts. Furthermore, the part rusted and failed in less than 3 years. I bought this expecting Moog parts, but received total garbage. Save your money and buy from a trusted seller. fit, and decent quality.

Products arrived on time. Exact inner and outer tie rods as well as front stabilizers replacement for my 2003 Toyota 4Runner. There is noticeable lesser road noise and vehicle handling is more stable. I had same brand rear stabilizers installed about a year ago and its still solid.

Purchased and installed June 2018. I was impressed with quality of components and “feel” of the sealed joints. Silenced an annoying clunk sound on my 03 4Runner. Early January 2019 I’m surprised to find surface rust on them. Doesn’t noticeably affect the performance at this point and being in the Chicago area rust is to be expected eventually but not this quickly. I’d still recommend them; they’re relatively inexpensive and easy to replace but hopefully they’ll last a few years.

Installed this on my 2005 Toyota 4Runner V6. Fits perfectly and works great. Quieted down a rattle in the front end. This is one side, you also need the other side (don't know the part number). Very easy to install.

for my 12fjcruiser, the new ones mentioned wrench flat for holding the link when i ratched the nut in but I don’t see it. I had to use a torx bit to hold down each bolt shaft to install the nut. it was time consuming, satisfied with the purchase and outcome.

perfect

Was delivered Nov 28th 2018. Package was in good shape, the part made an impression of a fairly well made product. Has replaced the original link in 2007 4runner in December 2018. Fast forward to April 2019 (less then 3000 km of driving) - complete fail - the joint is very loose and doesn't function as designed at all, which makes sway bar wobling and producing noise. The warranty request has been submitted, will update the review depending on the manufacture response.

Toyota technician physically demonstrated joint popping out of socket after 2000km of driving. Don’t waste your money.