APIELE 10 Amp 22mm Latching Push Button Switch 12V Angel Eye LED Waterproof Aluminum Alloy Round Self-Locking 7/8'' 1NO 1NC 1 Pack (10 Amp/Blue Led)

High-quality switches used in my RV class B build

I have ordered many of these and they have all worked great. Also they last a long time. They are made very well. Highly recommend.

Just what I wanted.

The media could not be loaded. Works perfectly, didn’t realize it was a 2 way switch just a bonus I didn’t need, I didn’t use the other wires.Love that it has a harness to it made it really easy to install.

Only issue is it doesn’t come with a wire diagram. But simple enough to figure it out

Very well made and bright - also came with easy instructions. Installed one for my fog lights on my 2019 Ram truck.

Good quality switch. Works fine and according to the description. I’m just not good at understanding this stuff.With this switch you have the blue circuit closed and the yellow circuit open. Then you push the button and the yellow circuit closes and the blue circuit opens. In other words, you switch power from one device to another. I suppose it could be used to switch off low beams and on high beams, then push the button to switch off high beams and on low beams. Something is always on and then the other off until you push the button and flip it.The red and black wires are for the led light on the switch itself. They don’t affect the outcome of what the switch powers.Unfortunately I wanted a switch that controls two circuits in a different way - both on or both off. I believe this is called DPST - double pole single throw. This switch might also be a Dpst but it’s one on and one off instead of both on and both off.Anyway hope this helps others out there that are electrically challenged like me.

Writing this review to help others so they don’t run into the problem I did, that took forever to figure out. The instructions don’t mention how to wire a grounded circuit which is what is needed to use the switch for this purpose. If that is your situation it should be wired as follows: Blue Wire (4) to device (trunk wire) Blue wire (3) and Black ground to car ground wire. Red wire to (power) headlight switch or dimmer to only turn on the led in the switch on when the headlights are on. Yellow wires are not used and can be de-pinned if you want them out of the way or just tape them up. This is what you must do if you need to ground a circuit with the switch versus power a circuit. Not a common situation but one the instruction should cover. This makes a great trunk button in my mustang and looks factory once installed.