Question 1

Can this system work with a footswitch to turn the reverb/effects on and off?

Accepted Answer

I do not believe this has a plug in to add / delete preset reverb to the program.  Reverb is selective PER input.  I would sugguest that If you look for a unit to play/rent, that you can see the quality vs price... Now a good audio tech could wait for the warranty to expire and give you some way re-engineer a FIXED channel, like mic 1 to trigger the reverb for the assigned input... Other wise, hear it is a little hard to get ahold of Behringer to see if they have a PA that has REMOTE FOOT SWTCH Trigger and price point you can live with?  Or whether they personally have modified a PA200 for a customer...I see that it could be popular to do so.  I rarely used my reverb/echo since I was using it for straight PA FOR MEETINGS but not for performance...I have the PA150 At 50 watts lower, but it did kick up pretty good in smaller venues at 150watts RMS, hooked up to external wireless mike combos, and mike/line breakout boxes (Matching computer laptop signals to mic input for long lines of signal mono) thru a 75ft "snake" to feed and be fed signals to and from the PA UNIT out to the Pair of the attached speakers mounted on MIC STAND THREADS, with some 2.5-3db LOSS of signal level to speakers with 75 to 80ft of speaker level 4/8 OHM line loss, not typical of a small nucleus personal single/duo PA use designed FOR SMALL PA USE.  But if you push in enough signal  (S/N with NO distortion/noise, and the output side should be loud enough without creating any distortion/noise but becareful, This system is not designed to forgive....A fine balancing act to not over drive the speakers and Crack them with TOO LOUD.  I LIKE IT TAKES WIRELES but I believe you limit yourself with Just Be bringing only wirless.  Shire systems would be better...I used cheaper Advance wireless PAIRED receiver/tx mutter either hand mix pairs or lavaliar pairs or one and one which is great, being capable to assign channels with blue freq UGH low channels or GREEN SET frequencys....Note you may have to register your mics and frequencies with the new FCC rules to CUT interference with out nearby users  Bottom line...Good starter system that worked well for me, no wireless on my older model, single mix only by the way...But if you want to expand later, then pay for your expansion dreams NOW!  SO save up...by more now, it will be cheaper and cleaner.  You will need, SPEAKER GRADE, 2 CONDUCTOR PHONE CONNECTOR MALE/FEMALE extension cables.  Sugguest 25-35ft, with couplers to extend your wires with system, or MALE/MALE PLUGS.  THESE WIRES are impotant, treat them just as well as three find Mike cords...learn how to properly wrap cords up...Tutorials on YouTube!  Buy books here understanding basic PA to recording techiques...  also...this low price unit has several out pur levels, including to PLAY with sub-wolfer and Line level recording stereo out puts besides speakers, or you could out put to another PA HEAD in Monoral signal mixed.  Play/learn and image...You'll be surprise like others that saw my "sewing machine sized" PA.  They were amazed.  Other companies have same type of competing units...Look for your needs, get expert advice, and support those companies too with your purchases for that advice...You can buy cheaper here?, but other than I and a Few others...hard to get advice on command! Just saying you get what you pay for! Good Luck...

Question 2

Will i be able to use this equipment in south africa where we use 220-240v?

Accepted Answer

Yes..!! You can use it. If you see the 4th picture here then just above the power plug, it mentions ''100-240v'' So, I do not think that you need a converter. you can just plug in directly.

Question 3

How to integrate this with a DJ equipment? Any recommendations please

Accepted Answer

Plug the PPA200  line out into that system or plug that system into the stereo input on the PPA200.

Question 4

Can this system (ppa 200 behr. europort)  slow the actual song speed down? i need to slow the song down in order to learn the dance steps to it

Accepted Answer

As the others have said, it is only a PA SYSTEM.  YOU WILL NEED A digital delay box/circuit.  I sugguest you see a performers center like GUITAR CENTER or other professional music center...If no answer, seek out Prominate RECORDING STUDIOS IN YOUR TOWN, BROADCAST RADIO/TV STATIONS CAN HELP YOU TO FIND A LOCAL SOURCE FOR SUCH A TYPE OF EQUIPMENT DELAYING CIRCUIT...

Mounting type	Tabletop
Power source	Corded Electric
Connector type	Aux
Material	Plastic
Item weight	12 Kilograms
Output wattage	2E+2 Watts
Number of channels	5
Audio input	Microphones and Musical Instruments
Recommended uses for product	Amplification of voices and musical instruments, corporate events, seminars, presentations, karaoke evenings, musical performances in small rooms
Manufacturer	Music Tribe
UPC	696859054242
Global Trade Identification Number	04033653040570
Item Weight	12 Kilograms
Product Dimensions	68.58 x 42.04 x 24.13 cm; 12 kg
Item model number	PPA200
Color Name	Black
Material Type	Plastic
Country Produced In	china
Wattage	200 watts

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

BehringerPPA200

Details

Description

Specifications

Have a Question? See What Others Asked

Reviews

Common Questions